Back to Chelan County PUD's main website »

Posts Tagged ‘heating’

‘E’ is for emergencies

Posted in Energy conservation, Heating and cooling on December 2nd, 2015 by Susan – Be the first to comment

PrintChanging to ‘e heat’ on your heat pump thermostat will reduce energy savings

Every winter we talk to customers with heat pumps who switch their settings to “e heat,” “EM heat” or “auxiliary heat” at the first sign of frost. If you want to take advantage of the energy-efficiency of a heat pump, making that switch may be a bad idea.

A heat pump draws heat from outside air. When temperatures drop, a heat pump draws less heat inside. Eventually it can’t provide all the heat needed and supplemental heat from your furnace kicks in.

Caucasian lady pressing modern thermostatThat furnace heat — called electric resistance — is 100 percent efficient. But heat pump heat is 200 to 300 percent efficient. If you switch your thermostat to the e-heat setting you’re shutting off the heat pump and relying entirely on the furnace. Which means you’re surrendering potential energy savings.

As energy expert Dr. Allison Bailes states, if you want to save on your electric bill, keep the thermostat at the “Heat” setting. Save the emergency setting for a real emergency, such as when your faithful old heat pump quits working.

***

 Energy Vanguard article: ‘How NOT to use your heat pump thermostat’

 All about air source heat pumps

Energy savings in 3D with CO2

Posted in Energy conservation, Heating and cooling on September 30th, 2015 by Susan – Be the first to comment

PUD Engineer Jim White’s Variable Air Volume box, 3D-printed in plastic at the Department of Energy’s Oak Ridge National Laboratory.

PUD Engineer’s proposal wins national crowdsourcing contest

A breath of fresh air is always nice, but too much of it can result in wasted energy that’s costly to owners of commercial buildings.

A proposal from PUD Engineer Jim White to use carbon dioxide monitors to help control air volume in buildings got the nod from the Oak Ridge National Laboratory, winning the lab’s Buildings Crowdsourcing Community Campaign last month.

Jim White

CO2 sensors will be installed next to 60 thermostats in the PUD’s Headquarters Building in downtown Wenatchee.

White, a Senior Energy Efficiency Engineer with a PhD in mechanical engineering, won in the Sensors and Controls category for his design for variable air volume (VAV) mixing boxes. His design combines temperature and carbon dioxide sensors to control outside airflow settings of individual VAV boxes. It could yield significant energy savings while improving air quality.

A model of the concept was 3-D printed and exhibited at the lab’s Industry Day on September 24.

‘A kid in a candy store’

White said he felt like “a kid in a candy store” at the conference, which featured displays and demonstrations of scientific advances. For example, White said he watched a clothes dryer technology that uses ultra-high frequency sound vaporize water from clothing in seconds. This could be used to quickly dry clothes at the end of a wash cycle, eliminating the need for a separate dryer.

Now that’s something we can relate to.

Unless you’re a building scientist or operator, White’s innovation seems a little more obscure. But it has the potential to reduce energy use in buildings significantly.

White’s idea will be put to the test at the PUD’s Headquarters Building this winter, where he expects to cut energy consumption by 20 percent. That’s in addition to a 35 percent drop in energy use from earlier improvements made at the office building on Wenatchee Avenue.

CO2 sensor

The monitor on the left shows carbon dioxide levels in a room, while the chart on the right indicates whether a room is adequately ventilated.

How does the carbon dioxide theory work?

Humans emit carbon dioxide as they exhale, White explained. Carbon dioxide sensors can be used to indicate how much ventilation is needed for any given space. Instead of setting air flow at a fixed position, which can cause the space to be over air-conditioned, CO2 sensors can be used to vary the volume of air based on actual ventilation requirements – what those in the room need to be comfortable and refreshed.

Keeping your cool

Tying air flow to carbon dioxide should eliminate over-ventilation and excessive cooling, which wastes energy. “This will still give the ventilation that’s needed, but allow for optimum levels,” White said.

Demand Control Ventilation is not new, White said, but using CO2 monitors in conjunction with individual VAV boxes has not been done elsewhere.

The PUD’s heating, ventilating and air conditioning (HVAC) uses a system commonly found in large commercial buildings. A large rooftop unit supplies a mixture of fresh and return air at 55 degrees to individual VAV boxes. A thermostat controls the damper in each VAV box to vary the volume of 55-degree air that is supplied to each zone. If the space does not need air conditioning, the VAV box could shut off the flow of 55-degree air to the space, but this would also stop the flow of fresh outside air. To make sure there is enough fresh ventilation air to the space, the VAV boxes are normally set to provide at least 20 percent to 30 percent of the maximum air conditioning needs of the space at all times.

If that amount of 55-degree air is too much, electric heaters will often come on to reheat the previously air-conditioned air. Depending on the season, this can waste electricity and make the space uncomfortably cool. Using a CO2 sensor to control the minimum air flow setting will reduce the amount of over-cooling, while also making sure the space is not over- or under-ventilated.

Oak Ridge National Laboratory launched its crowdsourcing platform in March so innovators like White could present ideas for energy efficient buildings to private and public sector leaders in research and development. The goal is to bridge the gap between cutting-edge ideas and the marketplace.

White presented his concept at the conference and took part in a panel discussion with two other winners and an official from GE.

White has been with Chelan PUD for 17 years, where he manages the PUD’s commercial and industrial energy efficiency program. Through his Resource$mart program, local businesses have saved thousands of dollars in energy costs. Prior to coming to Chelan PUD, White worked as an energy efficiency consultant at PacifiCorp and Portland General Electric, and as a staff engineer at the Governor’s Energy Management Center in Texas. He is a former board member of the Solar Electric Power Association and the architect of Chelan PUD’s award-winning Sustainable Natural Alternative Power program.

The Oak Ridge National Laboratory in Oak Ridge, Tenn., is the U.S. Department of Energy’s largest science and energy research facility. The heat pump water heater – a relatively new product promoted by Chelan PUD – was designed and tested at the lab and is manufactured in the U.S.

Thanks for saving energy

Posted in Appliances, Energy conservation, Heating and cooling, Lighting on January 28th, 2015 by Susan – Be the first to comment

PrintPopular programs help PUD exceed conservation goal by 40 percent

Here’s a hearty pat on the back to our customers: Chelan County residents taking advantage of energy-efficiency programs saved 13,052,400 kilowatt hours of energy last year – enough to power about 504 local homes.

The savings helped Chelan County PUD surpass its mandated 2014 conservation target by 40 percent and meet a “stretch” goal of 1.49 average megawatts of savings.

Photo of clothes washers

Rebates on energy-efficient clothes washers continue through 2015.

Some 1,490 residents took advantage of programs to save energy and money including rebates on appliances, windows, insulation, ductless heat pumps and air source heat pumps; duct sealing for manufactured homes; and refrigerator/freezer recycling. Thirty-one businesses installed energy-efficiency improvements with help from the PUD.

Rebates and services continue through 2015; check out the many options.

Saving energy is a winning proposition for everyone. Customers save money with lower electric bills, reduce energy waste and in many cases, improve the comfort of their homes. When customers save energy, more power is available to sell at wholesale rates on the open market; those revenues help keep local retail rates low. Customers also help the PUD meet state-mandated targets under the Energy Independence Act.

Have you hugged your heat pump today?

Posted in Appliances, Energy conservation, Heating and cooling on August 27th, 2014 by Susan – 4 Comments

Lightly logoEnergy-efficient ductless heat pumps are winning the hearts and minds of customers

If they didn’t sit so high up on the wall you might try to hug them. People just love-love-love their ductless heat pumps.

These little workhorses — popular in Japan and Europe for years — are gaining ground in the Northwest, offering quiet, efficient cooling and heating. What’s not to love?

Photo of Glen Ferrier with ductless heat pump

Glen Ferrier says his family’s comfort “has gone way up” since installing an energy-efficient ductless heat pump in their Leavenworth home.

Since Chelan County PUD began its ductless heat pump program in 2012, about 35 customers have installed units in their homes and taken advantage of rebates of $750 per household. Among them are Glen and Jacqueline Ferrier of Leavenworth, who wanted to supplement the baseboard heat in their 35-year-old home and add air conditioning.

“Our comfort level has gone way up,” said Glen, a retired Forest Service silviculturist. “I just love this thing.  I can’t say enough about it. I come home when it’s hot, turn it on and it’s cool before you know it.”

The Ferriers had no air conditioning before installing their ductless heat pump. Their electric bills are slightly higher in the summer now, Glen said, “but who’s to complain? Our electricity here is ridiculously cheap.” Winter bills have gone down. And because the Ferriers don’t need to use their wood stove as a backup nearly as often now, they’re saving money on firewood, Glen said.

The home is 1,600 square feet on two levels. The ductless heat pump provides heating and cooling for the kitchen, living room and down a hallway to three bedrooms. Fans installed prior to the heat pump help circulate the heated and cooled air.

PUD rebates are open to customers with electric furnaces, baseboard, wall or radiant heat living in site-built, single-family homes up to a four-plex. Manufactured homes with furnaces are eligible, but manufactured homes using baseboard or wall heat are excluded. Customers are eligible for one rebate per household.

Details are on the PUD website or by visiting goingductless.com.

Passive-design home takes shape at Lake Chelan

Posted in Construction, Energy conservation, Heating and cooling, Sustainability on August 15th, 2014 by Susan – Be the first to comment

Lightly logoSeattle architect Brett Holverstott has updated his blog with photos showing the progress of the passive design house being built on Lake Chelan.

Mike Schramm of Green Gables Construction

Builder Mike Schramm takes a break during construction of the passive-design home on Lake Chelan.

The photos document some of the extra measures being taken to tightly seal the home using extra caulking, tape and dense-pack cellulose insulation. The south-facing home on the lake’s north shore will incorporate super-insulated floors, walls, and roof; air-tight enclosure; high performance windows primarily oriented to the south; and a heat recovery ventilator (HRV) which uses the outgoing air to precondition the incoming air. The home will not need a furnace. A passive home can consume 85 percent less heating/cooling energy than a typical home.

Brothers Mike and Mark Schramm of Green Gables Construction, Chelan, are the builders. The home is owned by Rick and Jacque Hyler of Renton, who will move to it permanently after retirement.

View updates on Holverstott’s blog from July 24 and July 4. Read the original story about Holverstott and the passive design home here.